 |
 |
 |
|
| |
| |
| SPECIAL INSTRUCTIONS
|
 Do
nut cut threads of candles before pouring wax for
the next batch of candles to avoid the re-threading
of the pipes unnecessarily.
If
ever the ejectors / machine is jammed do not apply
excessive force on the machine. Do not heat it machine
either to remove the wax. Just pour boiling water
in the
water tank to release the wax that is stuck
in the brass pipes.
To
avoid rejects, watch out for empty bobbins. When
thread in the bobbin is almost over, remove it from
the bobbin stand and tie the end of the thread with
the end of
freshly loaded bobbins and replace with
the new bobbin. This way threading operation with
the loop will be avoided.
While
stopping production of the machine at the end of
the shift or day or for a long period, leave the
last batch of candles in brass pipes itself. This
will avoid re-threading
of the machine and also
any damage to the brass pipes from dust etc.
In
case the brass nozzles / ejectors are clogged with
wax, they can be cleared with the help of a thick
wire provided (slightly thicker than the loop wire)
for this purpose.
Apply
grease / oil daily to machine.
|
|
|
|
| |
|
|
| |
|
|
| |
|
| |
|
|
|
|
| |
|